APW3-12-1600-B2 Power Supply by Bitmain

$299.00

Compare
Category:

Description

Bitmain is proud to announce that the AntMiner APW3-12-1600 PSU Series is now on sale!

The APW3-12-1600 Series AC-DC PSU is specifically designed with mining operations in mind, and combines high conversion efficiency and a strong dynamic performance into a power dense package. It also features short circuit, overload, overheat, low voltage and overload protections.

This PSU includes  several features which make it optimal for cryptocurrency mining operations, including:

1) The air flow direction runs from the AC input to the DC output, which is the same configuration as most miners. This proves beneficial for those with large-scale mining operations where heat management is a major consideration.

2) The PCB uses a conformal coating to prevent damage from high voltage spark discharges on MOS pins, or near high-pressure solder joints when external conductive particles or dust enter the PSU.

3) The APW3-12-1600 can work stably in environments with a 50°C ambient temperature. If temperatures exceed 50°C, the PSU should be underclocked (refer to Max Load vs. Ambient Temperature Graph in the user guide for details). Considering the high temperature in mining operations, all internal components are selected with a standard of 105°C, so the APW3-12-1600 has a much longer lifespan than a general use PSU under similar high temperatures.

4) The APW3-12-1600-B2 uses a PCI-E connector which is compatible with currently available ATX PSUs, as well as most bitcoin mining machines.One APW3-12-1600 is enough to power two AntMiner S5s at the same time.
The high power efficiency translates to big cost savings — if one uses a secondhand general use PSU running at 83% efficiency, when compared to the APW3-12-1600 running at 93.8% efficiency, assuming an electricity cost of $0.10 per kWh, a user could save more than $150 USD per year in power fees.

Note:

The PSU cannot be used in countries with a mains power voltage lower than 205V. The PSU will not start below this voltage. power cord is not included, please find one with at least 16A from your local market.

Electronic Parameters:

Output

DC Voltage

12V

Rated Current

133A

Rated Power

1600W

Ripple & Noise

<1%

Voltage Regulation

<2%

Source Regulation

<1%

Load Regulation

<1%

Setup, Rise Time

<5S

Power off Protection Trip Time

>10mS

Interface Type

5 pairs of 6 pin PCI-E connectors. 350mm length for each PCI-E cable

Input

Voltage Range

176-264V AC

Starting Voltage

200-205V AC

Frequency Range

47-63Hz

Power Factor

>0.95 (full load)

Leakage Current

<1.5mA (220V 50Hz)

Interface Type

IEC320-C13

Protection

Low-voltage Input

171-181V AC

Output Short Circuit

Yes

Output Overcurrent

134-150A

Overheat Protection

Yes

Environment Conditions

Operating Temperature

-20-50 ºC @ 100%,

-20-60 ºC @ 80% load (refer to Load/Temperature graph)

Operating Humidity

20% – 90% relative humidity (non-condensing)

Structure

Dimensions

332mm*87mm*41mm

Weight

2.3kg

Cooling

Fan Size

40mm*40mm*28mm

Air Blowing Direction

From AC input to DC output

Certification

FCC & CE certified

Warranty

12 month warranty(To valid this warranty a Repair ticket must be generated by customer on Bitmain website. )

Load-Efficiency-temperature